| Product Name |
100A/32V Diode Power Supply |
| Model Number |
LD-GL32100 / LD-WL32100 |
| Size |
323mm x 200mm x 69mm |
| Weight |
2.9KG |
| Input Voltage |
G--220V / W--110V AC 50Hz(±10%) |
| Output Voltage |
32V,16Bar |
| Output Peak Current |
20~100A |
| Output Frequency |
1~10Hz |
| Working Temperature |
-20~50ºC |
| Humidity |
Relative humidity 10%~85% |
Product Information
The major difference between the principle of semiconductor hair removal and traditional laser hair removal is that the traditional laser hair removal requires instantaneous high energy to burn the hair follicles while the semiconductor hair removal through the accumulation of low energy makes the hair follicles inactive and automatically removes hair so as to achieve the purpose of permanent hair removal without over-stimulating the skin and avoiding pain or risk.
Product Feature
-The working control signal can be customized as high level or low level.
-Input 3.11~5V analog control voltage corresponding to 20~100A current output.
-The current control signal is equipped with 5V limit function.
-High temperature protection.
-Silver frosted aluminum shell.
-With preset current function(optional).
Working Theory
The basic principle of semiconductor laser hair removal machine is mainly biological effect. When it chooses laser with wavelength of 808nm for irradiation it not only has good absorption of hair follicle melanin but also has no effect on normal epidermis. The melanin in light energy is absorbed by hair stem and light energy changes into heat energy raise the temperature of hair follicle thereby the hair follicle structure will be destroyed the hair follicle that already destroyed passes through natural physiology process hind is shed achieve depilate purpose thereby.
Advantage
-Non-invasive technology: Safe and non-invasive no pain no adverse reactions and side effects.
-Permanent hair removal: The effect is remarkable once and for all.
-High cost performance: Customers are more receptive.
Attention
-The wrong input voltage must be prevented during use. In particular the 220V voltage cannot be connected to the nominal 110V power supply.
-It is required to use two high-voltage cables larger than 2.5 square meters to connect the power supply with the semiconductor laser.
-In the layout of the whole machine strong electric wires should be separated from the weak signal lines to reduce interference.
-Please keep the environment dry and clean to avoid high voltage leakage.
-In the complete layout the power must be placed in a well-ventilated location.
-Operating Humidity 10~85%RH,without dew.
-Storage Temperature Humidity -20~+85ºC,5~85%RH.
Company Profile
Audited Supplier 
){kind=link}
){kind=link}